The following tips can greatly reduce the chances of dust pollution. Implementing these control measures can be done before and/or during a rapid response event.
- Apply water or dust suppressants to disturbed areas.
- Apply water to stockpiled bulk materials.
- Ensure that all roads, gutters and sidewalks are free of dirt/trackout.
- Refresh trackout control devices.
- Reduce traffic and vehicle speeds (lower than 15 miles per hour) on unpaved roads.
- Apply water or other control measures to unpaved roads.
- Reschedule control measures, such as street sweepers, to occur just before an expected event.
- Ensure that unpaved parking lots, including temporary event parking, are stabilized.
- Limit dust generating operations (ex: focus efforts on non-dust generating operations during an event).
- Cease operations during an event.
- Refrain from using leaf blowers.
- Hold a tailgate meeting with employees before an event so that everyone knows to be extra vigilant.
- Don't drive or park on dirt. If you absolutely cannot avoid driving over dirt, drive slowly.
- Avoid using leaf blowers and other equipment that raise a lot of dust. Avoid using gas-powered lawn and garden equipment.
- Reduce fireplace and wood stove use and don't use your wood-burning fireplace on no-burn days.
- Ride all terrain vehicles and other off-road vehicles in authorized areas only and never on high pollution advisory days.
- Don't burn leaves, trash, or other materials.
- Use propane barbecue grills rather than wood or charcoal.
- Maintain your landscape. Cover loose dirt with vegetation or gravel.
- Report suspected violations or concerns to the department at 602-372-2703, or use our Air Quality Violations Report form.
- Disturbing the crust raises dust. Avoid any activities that disturb the naturally-occurring protective layer of crust, especially on high pollution or high-wind days.