Rule Clarification Request

7/97

TG 01-001
Rule 335 and other coating rules: VOC limits for the onsite coating of components at manufactured-building and mobile home factories.

7/11/01

TG 00-002
Rule 353, subsections 301.3a(3) and 502.2: Inspection of dispensing tanks receiving gasoline less than once per week

12/20/00

Rescission of Technical Guidance #TG 00-001
Rule 331: Exemption of Rule 345 by Rule 331

4/21/04

Rescission of Technical Guidance #TG98-004
Rule 345 as adopted 11/20/96

Recission of Technical Guidance #TG 99-005
Rule 331: Regulation of aerosol and other handheld containers
NOTE: This guidance was created by the Rules Clarification Committee at the request of Steve Peplau, manager of the Air Quality Division, in response to a letter from a representative of the Arizona Association of Industries requesting this clarification.

TG 99-004
Rule 319, subsection 502.1: Evaluation of volumetric flow for cotton gins

TG 99-003
Rule 345, Section 301 & 303: Coating limits for uncoated surfaces and replacement parts used in refinishing light-duty vehicles

Rescission of Technical Guidance #TG 99-002
Rule 331, subsection 308.2c(2) & Rule 348, subsection 305.2: Regulating flush cleaning of aerospace components

Rescission of Technical Guidance Document TG 99-001
Rule 312, as adopted 7/13/1988

TG 98-007
Rule 342: Applicability to businesses not principally engaged in the manufacture of furniture

TG 98-006
Rule 200, Section 303.3c(7)(j): Determining permit applicability thresholds

TG 98-005
Rule 315, subsection 301.1: Requirements for spraying in outdoor roofed enclosures

TG 98-004
Rule 345, subsection 305.1: Water cleanup and the status of gun-cleaning machine requirements

TG 98-003
Rule 330, Sections 301 & 302: VOC from Asphalt Plants

TG 98-002
Rule 350, subsection 301.2: Requirement for P/V valves

TG 98-001
Rule 335: Architectural Coating

TG 97-004
Rule 337, Section 303: VOC Vapor Pressure

Rescission of Technical Guidance Document TG 97-003
Rule 320, as adopted 7/13/1988

TG 97-002
All Rules where Section 500 contains test method provisions

TG 97-001
Rule 320, Sec. 304: Applicability of the hydrogen sulfide fence line limit to fuel burning equipment

TG 93-005
Rule 336: Gel Coats

TG 93-003
Rule 350: Vapor vent/vacuum valves at bulk plants and terminals

TG 93-002
Rules 330 & 336: Polyester Resins (Fiberglass; cultured marble)